The anthracite LAVABERG shower tray, RAL 7016, is an ultra-flat mineral resin shower tray composed of 75% volcanic dolomite and 25% high-performance resin. Its textured slate-effect surface provides a refined, understated look that is easy to maintain every day. Slip-resistant, cuttable, and available in 6 exclusive colours, it adapts to all configurations — walk-in shower, installation on supports, or recessed installation. 10-year warranty.
Technical specifications
- Composition: 75% dolomite + 25% high-performance resin
- Thickness: 3 cm (ultra-flat)
- Finish: textured slate effect
- Slip-resistant: class C3 — DIN 51097 / PN24 — XP P 05-010 (PMR standard)
- Antibacterial surface with integrated acoustic insulation
- UV-resistant — suitable for indoor and outdoor use
- Repairable in the event of scratches or impacts (repair kit available)
- Cuttable by up to 4 cm in length and width
- Weight: 45 kg/m²
- Warranty: 10 years
Available colours
The LAVABERG is available in 6 exclusive colours:
Installation methods
The LAVABERG is compatible with 3 installation methods:
- Recessed — flush integration into the floor, ideal for a walk-in shower
- Surface-mounted — direct installation on a flat surface
- On adjustable supports — 1 support every 20 cm, suitable for technical floors
The waste outlet is included in the packaging (compartment underneath the pallet).
Recommended sealant: elastic polyurethane only — never tile adhesive or adhesive mortar.
⚠️ Warranty and modifications
The LAVABERG shower tray can be cut by up to 4 cm maximum in length and width to fit certain configurations.
💡 Receipt and storage
- Check the condition of the shower tray within 48 hours of delivery
- Store flat on a rigid, level surface
- Do not leave it on the original pallet (risk of deformation from moisture)
- Do not place anything on the shower tray
- If stacking, place rigid supports between units — maximum 3 units
- Store in a dry, ventilated area, between 10°C and 30°C
Having a problem with your shower tray?
Find the answer to your question here
FAQ — Extra-flat mineral resin shower tray
What is the composition of the LAVABERG shower tray?
LAVABERG is composed of 75% dolomite (volcanic mineral stone) and 25% high-performance resin, giving it greater strength than 100% acrylic shower trays.
Is LAVABERG suitable for people with reduced mobility?
Yes. It is certified slip-resistant class C3 (DIN 51097) and PN24 (XP P 05-010), meeting accessibility requirements for wet surfaces.
Can LAVABERG be installed outdoors?
Yes, LAVABERG is UV-resistant and suitable for indoor and outdoor use (garden showers, spa areas, etc.).
Why is my shower tray bulging?
Mainly due to rigid bonding or a lack of an expansion joint. You must use an elastic polyurethane sealant.
Can I leave my shower tray on its pallet until installation?
No. It must be stored flat on a rigid surface, never on the transport pallet, to prevent any flexing.
Is it a manufacturing defect if the shower tray deforms?
In 9 out of 10 cases, the cause is related to installation or storage, not the shower tray itself.
Can a LAVABERG shower tray be installed on support points?
Yes, with one support point every 20 cm to ensure uniform support and prevent any flexing.
Which sealant should be used for installation?
An elastic polyurethane sealant, never tile adhesive or thin-set mortar.
Is the warranty still valid if I cut the shower tray?
No. Any modification voids the manufacturer's warranty. The 10-year warranty applies only to a shower tray installed without modifications.