The anthracite LAVABERG shower tray, RAL 7016, is an ultra-flat mineral resin shower tray composed of 75% volcanic dolomite and 25% high-performance resin. Its textured slate-effect surface provides a refined, understated look and is easy to maintain on a daily basis. Slip-resistant, cuttable, and available in 6 exclusive colours, it adapts to all configurations — walk-in shower, installation on pedestals, or recessed installation. 10-year warranty.
Technical specifications
- Composition: 75% dolomite + 25% high-performance resin
- Thickness: 3 cm (ultra-flat)
- Finish: textured slate effect
- Slip-resistant: class C3 — DIN 51097 / PN24 — XP P 05-010 (accessibility standard)
- Antibacterial surface and integrated acoustic insulation
- UV-resistant — suitable for indoor and outdoor use
- Repairable in the event of scratches or impact (repair kit available)
- Can be cut by up to 4 cm in length and width
- Weight: 45 kg/m²
- Warranty: 10 years
Available colours
The LAVABERG is available in 6 exclusive colours:
Installation methods
The LAVABERG is compatible with 3 installation methods:
- Recessed — flush integration into the floor, ideal for a walk-in shower
- Surface-mounted — direct installation on a flat surface
- On adjustable pedestals — 1 pedestal every 20 cm, suitable for raised technical floors
The waste drain is included in the packaging (compartment under the pallet).
Recommended sealant: elastic polyurethane only — never tile adhesive or adhesive mortar.
⚠️ Warranty and modifications
The LAVABERG shower tray can be cut by up to 4 cm maximum in length and width to suit certain configurations.
💡 Delivery and storage
- Check the condition of the shower tray within 48 hours of delivery
- Store flat, on a rigid, level surface
- Do not leave it on the original pallet (risk of deformation due to moisture)
- Do not place anything on the shower tray
- If stacking, place rigid supports between units — maximum 3 units
- Store in a dry, well-ventilated area, between 10°C and 30°C
Having an issue with your shower tray?
Find the answer to your question here
FAQ — Extra-flat mineral resin shower tray
What is the composition of the LAVABERG shower tray?
LAVABERG is made of 75% dolomite (volcanic mineral stone) and 25% high-performance resin, giving it greater strength than 100% acrylic shower trays.
Is LAVABERG suitable for people with reduced mobility?
Yes. It is certified slip-resistant Class C3 (DIN 51097) and PN24 (XP P 05-010), and complies with accessibility requirements for wet surfaces.
Can LAVABERG be installed outdoors?
Yes, LAVABERG is UV-resistant and suitable for indoor and outdoor use (garden showers, spa areas, etc.).
Why is my shower tray bulging?
Mainly because of rigid bonding or a lack of an expansion joint. You must use an elastic polyurethane sealant.
Can I leave my shower tray on its pallet until installation?
No. It must be stored flat on a rigid surface, never on the transport pallet, to prevent any flexing.
Is it a manufacturing defect if the shower tray deforms?
In 9 out of 10 cases, the cause is related to installation or storage, not the shower tray itself.
Can a LAVABERG shower tray be installed on support points?
Yes, with one support point every 20 cm to ensure uniform support and prevent any flexing.
Which sealant should I use for installation?
An elastic polyurethane sealant—never tile adhesive or thin-set mortar.
Is the warranty still valid if I cut the shower tray?
No. Any modification voids the manufacturer's warranty. The 10-year warranty applies only to a tray installed without modification.